Quasar V V-1303A Copy Your Tapes Dubbing, Connections you’ll need to make, Selecting Input Mode

Copy Your Tapes (Dubbing)

Connections you’ll need to make.

Playing (Source) VCR

AUDIO	VIDEO
OUT	IN FROM ANT.
IN	OUT TO TV

Recording (Editing) unit

VIDEO IN	AUDIO IN
	AUDIO IN

Basic Operation

Playback (Source) Recording (Editing) unit

1	Insert pre-			Insert blank tape with
	recorded tape.			record tab.
	Our Vacation			• Dubbing tapes protected
				with Copy Guard will have
				poor quality results.
2				Select “LINE” mode.
				See “Selecting Input Mode” below.
3	Press PLAY		then	Press REC	, then
	PAUSE	at starting		PAUSE/SLOW
	point to put in			immediately to put in
	Standby mode.			Standby mode.
	(Perform operation of steps 4 and 5 on both units at same time.)
4	Press PLAY			Press PAUSE/SLOW
	to start dubbing.			to start dubbing.

5	Press STOP	Press STOP
	to stop dubbing.	to stop dubbing.
	STOP

Selecting Input Mode

Caution

•Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.

Method 1:
Press CH		. The display will change as follows.
				1	2		3
						(CABLE)		(TV)
Method 2:			LINE				125 or	69
a	Press ACTION	for MAIN MENU.
b	Press	to select “TV,” then press
	ACTION	for SET UP TV screen.
c	Press	to select “INPUT SELECT,” and
	then press	to select “TUNER” or “LINE.”
d	Press ACTION	twice to exit this mode.

13