Connections/ Initial Setup (Ready to Play)
Please make all cable or antenna connections before plugging into the AC outlet. Plugging the unit power cord into an AC outlet starts auto channel and clock set.
Connecting
For ANT./Cable Connect the cable from Antenna/Cable to the VHF/UHF terminal on the unit.
For DSS/Cable Box
Connect the OUT jack on your cable box to the VHF/UHF terminal on the unit with a RF cable.
UNIT
IN from
ANT./CABLE
VHF/UHF
VHF/UHF
Cable TV
Converter Box
WARNING:
Overtightening “Nut type” RF coaxial cables may damage jacks. Finger tighten only.
VHF/UHF
IN from
ANT./CABLE
Initial Setup (Ready to Play)
1 Plug the unit power cord into an
AC wall outlet.
Press POWER on the remote or
2 unit. The unit comes on and auto
channel and clock set starts.
CH AUTO SET PROCEEDING
3 Settings are made automatically. When setup is done, this screen appears.
2/ 6/2002 WED 12:00PM
DST : ON
SETT ING : CH 10
AUTO CLOCK SET
COMPLETED
•If you use a cable box, turn it on and set it to the Public Broadcasting Service (PBS) channel in your time zone. If you use a DSS reciever, it must be turned off.
AUTO CLOCK SET
PROCEEDING
CANCEL : PRESS STOP KEY
If AUTO CLOCK SET IS INCOMPLETE screen appears, set the clock using
MANUAL CLOCK SET procedure on next page.
AUTO CLOCK SET
I S I NCOMPLETE
PLEASE SET CLOCK BY
PRESSING ACT I ON KEY
8
