Quatech QSC-100 instruction

The Windows NT device driver is installed by running the SETUP program. Up to 256 serial ports are supported. There is a command line-based configuration utility which is used for adding PCI bus and ISA bus serial ports. Please refer to the documentation included with the device driver on the Quatech COM CD for full installation and configuration details

Quatech QSC-100 User's Manual

Page 21

Image 21

Contents

QSC-100 Warranty Information Declaration of Conformity Standards to which Conformity is Declared Application of Council DirectiveType of Equipment Equipment Class QTPCI.EXE General Information Features IND Option --- Surge Suppression UpgradePart Number IND Option Hardware Configuration Factory Default ConfigurationEnable Scratchpad Register SPAD, J6 Clock multiplier jumper options Force High-Speed Uart Clock X2, X4, or X8, J3-J5 Jumper/connector locations Hardware Installation Address Map and Special Registers Base Address and Interrupt Level IRQPort Address Range Interrupt Status Register Enabling the Special RegistersDlab Bit Spad Jumper Register selected for Bit Description Enhanced Serial Adapter Identification Options RegisterClock Rate Multiplier Bit Name Description Clock Rate Uart Clock Maximum Data Multiplier Frequency RR1 RR0 Windows Millennium Windows Configuration Windows Page Windows Viewing Resources with Device Manager Windows NT Page QTPCI.EXE DOS and Other Operating Systems QTPCI.EXE Basic Mode display QTPCI.EXE Expert Mode display OS/2 External Connections QSC-100 connector pinouts RS-232 Port Signal INTA# PCI Resource Map Specifications Page Troubleshooting Computer will not boot upCannot communicate with other equipment QSC-100 Revision March

Quatech QSC-100 user manual

Models: QSC-100