Quatech QSC-100 specification

1.After inserting a QSC-100 for the first time, the "Add New Hardware Wizard will appear at start up. Click the "Next" button.

2.Select "Search for the best driver for you device". Click the "Next" button.

3.On the next dialog, select the "CD-ROM DRIVE" check box. Insert the Quatech COM CD (shipped with the device) into the CD-ROM DRIVE.

Click the "Next" button.

Quatech QSC-100 User's Manual

15

Image 17

Quatech QSC-100 user manual

Contents

QSC-100 Warranty Information Declaration of Conformity Standards to which Conformity is Declared Application of Council DirectiveType of Equipment Equipment Class QTPCI.EXE General Information Part Number IND Option FeaturesIND Option --- Surge Suppression Upgrade Enable Scratchpad Register SPAD, J6 Hardware ConfigurationFactory Default Configuration Clock multiplier jumper options Force High-Speed Uart Clock X2, X4, or X8, J3-J5 Jumper/connector locations Hardware Installation Port Address Range Address Map and Special RegistersBase Address and Interrupt Level IRQ Interrupt Status Register Enabling the Special RegistersDlab Bit Spad Jumper Register selected for Bit Description Enhanced Serial Adapter Identification Options RegisterClock Rate Multiplier Bit Name Description Clock Rate Uart Clock Maximum Data Multiplier Frequency RR1 RR0 Windows Millennium Windows Configuration Windows Page Windows Viewing Resources with Device Manager Windows NT Page QTPCI.EXE DOS and Other Operating Systems QTPCI.EXE Basic Mode display QTPCI.EXE Expert Mode display OS/2 External Connections QSC-100 connector pinouts RS-232 Port Signal INTA# PCI Resource Map Specifications Page Cannot communicate with other equipment TroubleshootingComputer will not boot up QSC-100 Revision March