Qtpci.Exe | Quatech QSC-100 manual

4.2	Enabling the Special Registers	10
4.3	Interrupt Status Register	10
4.4	Options Register	11
4.4.1 Enhanced Serial Adapter Identification		11
4.4.2 Clock Rate Multiplier		12
5 Windows Configuration		13
5.1	Windows Millennium	13
5.2 Windows 2000		14
5.3 Windows 1998		15
5.4 Windows 1995		16
5.5	Viewing Resources with Device Manager	18
5.6 Windows NT		19
6 DOS and Other Operating Systems		20
6.1.1 QTPCI.EXE		20
7 OS/2		23
8 External Connections		24
9 PCI Resource Map		26
10 Specifications		27
11 Troubleshooting		29

Image 5

Quatech QSC-100 user manual Qtpci.Exe

Contents

QSC-100 Warranty Information Declaration of Conformity Standards to which Conformity is Declared Application of Council DirectiveType of Equipment Equipment Class QTPCI.EXE General Information Part Number IND Option FeaturesIND Option --- Surge Suppression Upgrade Enable Scratchpad Register SPAD, J6 Hardware ConfigurationFactory Default Configuration Clock multiplier jumper options Force High-Speed Uart Clock X2, X4, or X8, J3-J5 Jumper/connector locations Hardware Installation Port Address Range Address Map and Special RegistersBase Address and Interrupt Level IRQ Interrupt Status Register Enabling the Special RegistersDlab Bit Spad Jumper Register selected for Bit Description Enhanced Serial Adapter Identification Options RegisterClock Rate Multiplier Bit Name Description Clock Rate Uart Clock Maximum Data Multiplier Frequency RR1 RR0 Windows Millennium Windows Configuration Windows Page Windows Viewing Resources with Device Manager Windows NT Page QTPCI.EXE DOS and Other Operating Systems QTPCI.EXE Basic Mode display QTPCI.EXE Expert Mode display OS/2 External Connections QSC-100 connector pinouts RS-232 Port Signal INTA# PCI Resource Map Specifications Page Cannot communicate with other equipment TroubleshootingComputer will not boot up QSC-100 Revision March