OS/2 | Quatech QSC-100 manual

7 OS/2

The OS/2 device driver supports up to 32 serial ports in a system. Installation is a

manual, but simple, process. Please refer to the read me documentation included on the Quatech COM CD with the device driver for full installation and configuration details.

Quatech QSC-100 User's Manual

23

Image 25

Quatech QSC-100 user manual OS/2

Contents

QSC-100 Warranty Information Declaration of Conformity Standards to which Conformity is Declared Application of Council DirectiveType of Equipment Equipment Class QTPCI.EXE General Information IND Option --- Surge Suppression Upgrade FeaturesPart Number IND Option Factory Default Configuration Hardware ConfigurationEnable Scratchpad Register SPAD, J6 Clock multiplier jumper options Force High-Speed Uart Clock X2, X4, or X8, J3-J5 Jumper/connector locations Hardware Installation Base Address and Interrupt Level IRQ Address Map and Special RegistersPort Address Range Interrupt Status Register Enabling the Special RegistersDlab Bit Spad Jumper Register selected for Bit Description Enhanced Serial Adapter Identification Options RegisterClock Rate Multiplier Bit Name Description Clock Rate Uart Clock Maximum Data Multiplier Frequency RR1 RR0 Windows Millennium Windows Configuration Windows Page Windows Viewing Resources with Device Manager Windows NT Page QTPCI.EXE DOS and Other Operating Systems QTPCI.EXE Basic Mode display QTPCI.EXE Expert Mode display OS/2 External Connections QSC-100 connector pinouts RS-232 Port Signal INTA# PCI Resource Map Specifications Page Computer will not boot up TroubleshootingCannot communicate with other equipment QSC-100 Revision March