Quinny CV080 manual Install Rear Wheels, Install Front Wheels, Unfold Stroller Frame, Attach Seat

TM Assembly

1 Install Rear	1
Wheels
Insert the rear wheel axle
into the frame until you hear
a “click” (Figure 1). Repeat
for other rear wheel. Pull
to confirm it is assembled
securely.	2
2 Install Front
Wheels
Position front wheel with
Zapp logo facing outward.
Insert front wheel until you
hear “click” (Figure 2). Repeat
for other front wheel. Pull to
confirm it is assembled securely.
3 Unfold Stroller	3
Frame

Push in on button	(Figure	3b
3b).
Push in on button	while

lifting up on the handles until they click into place (Figure

3c).

3c

Extend the handle crossbar into the horizontal position until you hear a “click” (Figure 3d).

3d

Unfasten transport strap (see parts list image). Gently lift on the sides of the stroller (Figure 3).

Pull out on grey pedal until
	3a
you hear a “click” (Figure
3a).

4Attach Seat

Lower seat onto frame until it clicks into place (Figure 4).

Push down on seat pan until it

clicks (Figure 4a).

NOTE: Seat adapters are pre-assembled on frame and must always be in place to attach seat. See page 5 for more information. CAUTION: Stroller frame must be in open and in use position to install seat adapters and seat.

4

4a

3