
| Appendix | |
SELECTED LED Display: | ||
|
|
|
Activity |
| Meaning |
Off |
| Port is not selected. |
On (Steady) |
| Port is connected to an active PC. |
Flashing (On and Off equal) |
| Port is connected to an active PC and is being |
| accessed in Auto Scan mode. | |
|
| |
Flashing (On long; Off short) |
| Port is connected to an active PC and is being |
| accessed in Last/Next mode. | |
|
| |
|
|
|
Troubleshooting
Note: If you are experiencing problems, first make sure that there are no problems with the cables, and that they are all properly connected.
Symptom | Cause | Action | |
|
|
| |
| Keyboard needs to | Unplug the keyboard from the Console Keyboard | |
| be reset | Port, then plug it back in. | |
|
|
| |
| Master View needs | Turn off the PCs and unplug the keyboard cable | |
Keyboard Not | from the Master View | ||
to be reset | the keyboard cable back in to the | ||
Responding* | |||
| the PCs back on. | ||
|
| ||
|
|
| |
| Master View is in | Press the [Spacebar] to exit Auto Scan or Last/Next | |
| Auto Scan Mode or | ||
| Mode. | ||
| Last/Next Mode | ||
|
| ||
|
|
| |
| Mouse needs to be | Unplug the mouse from the Console Mouse Port, | |
| reset | then plug it back in. | |
| Master View needs | Turn off the PCs and the Master View | |
| five seconds; turn the Master View unit on; then | ||
| to be reset | ||
| turn the PCs on. | ||
|
| ||
Mouse Not |
| The Master View | |
| combo mice (with extra buttons and wheels) which | ||
Responding** |
| ||
| can be used as either a PS/2 or serial mouse when | ||
|
| ||
| Mouse in | they are in serial mode - switch the mouse to PS/2 | |
| unsupported mode | mode if you wish to use the extra buttons/wheels. | |
| If the problem persists, change the mouse and/or | ||
|
| ||
|
| mouse driver. Try a regular mouse and a generic | |
|
| mouse driver (like the ones that comes with the | |
|
| operating system). | |
|
|
|
11