RAD Data comm 100 Safety, General, Protocol, Throughput, wire Range, Connectors, Physical

WAN

•Protocol

HDLC

•Data Rate

Up to 10 Mbps synchronous

•Throughput

With WAN rate 10 Mbps:

19700 pps for 64-byte frames and increment byte data (00, 01, 02, …) 802 pps for 1536-byte frames and increment byte data (00, 01, 02, …)

•4-wire Range

700m (2300 ft)

•Connectors

V.24/RS-232, DB-25 female

V.35, 34-pin female via adapter cable V.36/RS-422, DB-37 female via adapter cable

RS-530, DB-25 female

X.21, DB-15 female via adapter cable 4-wire: 5-pin terminal block

•Operating Range Using Cat. 5 UTP cable:

10 Mbps: 500m (1640 ft)

5 Mbps: 700m (2300 ft)

GENERAL

• Physical
Length:	69 mm / 2.7 in
Width:	53 mm / 2.1 in
Height:	18 mm / 0.7 in
Weight:	30 g / 1.0 oz

•Power Supply

External 5 VDC/0.6A regulated adapter

Note: While TinyBridge-100 operates with any regulated 5 VDC, 600 mA power supply, the CE approval for the 4-wire versions requires provision of a grounding path through the use of a power supply with a three-prong plug.

•Power Consumption 400 mA @ 5 VDC

•Environment

Temperature: 0–50°C (32–122°F)

Humidity: Up to 90%, non-condensing

SAFETY

Safety Instructions

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT

North American Users

The TinyBridge-100 is powered by an external power supply. To reduce the risk of electric shock, fire and injury to persons:

Use only with a UL-listed and CSA Certified Class 2 power supply rated 5 VDC, 600 mA or more.

Instructions de Sécurité

Le point d’exclamation dans le triangle équilatéral alerte l’utilisateur d’importantes instructions concernant le fonctionement et l’entretien mentionées dans le livre qui accompagne l’appareil.

IMPORTANT

Pour les utilisateurs Nord Américains

Le TinyBridge-100 est renforcé par un transformateur extérieur. Afin de réduire le risque d’électrocution, de feux ou de blessure:

Utiliser seulement avec le UL listé et le CSA Certifié Classe 2 le transformateur de 5 VDC, 600 mA, ou plus.