RAD Data comm 100 Operation, LED Indicators, Connecting the 4-wire WAN Interface Connecting Power

TERMINAL BLOCK

TX

4-WIRE CABLE GND RX

	100
	LAN
WAN
PWR
	100
	-
	TinyBridge

X ANFIL 100FD

ON

FLC

LNGFP

ON

OPERATION

TinyBridge-100 operation is automatic. Table 2 shows how to diagnose the status of the TinyBridge-100 from the LED indicators.

Table 2. LED Indicators

	Table 3. DB-25 Pin Allocation
		(V.24/RS-232)
Pin	Name	Type
1	SHIELD
2	TxD	Output
3	RxD	Input

SCREW TERMINAL

Figure 7. Connecting the 4-wire WAN

Interface

Connecting Power

1.Connect external power adapter to a mains outlet

2.Plug in the external power adapter jack to the TinyBridge-100. The PWR LED lights up

Note: While the TinyBridge-100 operates with any regulated 5 VDC, 600 mA power supply, the CE approval requires use of the power supply listed in Ordering.

LED	Color	Description
PWR	Green	ON – Power is connected
		OFF – Power is disconnected
WAN	Yellow	ON – Activity on WAN (includes idle)
		OFF – No activity on WAN
	Red1	ON – Error condition on WAN
		OFF – No error condition on WAN
LAN	Green	OFF – No link integrity
		ON – Link integrity
	Yellow	OFF – No activity on LAN
		Blinking – Activity on LAN

100Green ON – 100 Mbps LAN OFF – 10 Mbps LAN

14-wire model

4	RTS	Output
5	CTS	Input
6	NC
7	GND
8	NC
9	NC
10	NC
11	NC
12	NC
13	NC
14	NC
15	TCLK	Input
16	NC
17	RCLK	Input
18	NC
19	NC
20	NC
21	NC
22
23	NC
24	NC
25	NC