RAD Data comm AMC-101 operation manual Cable Connections, AC Power Connection, Grounding

Chapter 2 - Installation & Setup AMC-101Installation & Operation Manual

Figure 2-5 Installation of Two Units (b)

AC Power

Connection

Warning

2.3 Cable Connections

AC power should be supplied to AMC-101 through a 1.5m (5 ft) standard power cord terminated by a grounded 3-wire plug.

When applying AC power, first connect the plug of the AC cable to the power connector on the rear panel of AMC-101 and then to the mains outlet.

Grounding

	Interrupting of the protective (grounding) conductor (inside or outside
	the instrument) or disconnecting the protective earth terminal can make
Warning	this instrument dangerous. Intentional interruption of the grounding
	conductor is prohibited.

2-4 AMC-101 Modules