RAD Data comm ASM-60 operation manual Quick Setup Menu, Menu Structure of Management Utility

Appendix C IR-IP Interface Module ASM-60Installation and Operation Manual

To end the utility, press <Esc> when the Main menu is displayed. This will also end the Telnet session.

Menu Structure of Management Utility

Figure C-5shows the menu structure of the IR-IP management utility.

Main Menu

1. Quick Setup	2. Management
	Access
	1.Telenet Password
	2. Telenet Activity Timeout
	3. SNMP Access
	4. SNMP Read Community
	5. SNMP Write Community
	6. SNMP Trap Community
	7. SNMP Management Table

1.LAN IP Address

2.LAN IP Mask

3.WAN IP Address

4.WAN IP Mask

5.Default Gateway

6.Read Protocol From DIP Switches

7.Protocol

3. Advanced Setup				4. Device Control
	1. Device Identification				1. New Software Download
	1.	Device Name			1.	Server IP Address
	2.	Contact Person			2.	File Name
	3.	System Location			3.	Total Timeout
					4.	Start Operation
	2. Interface Parameters
	1.	LAN Status			2. View Error Log
	2.	WAN Status
	3.	WAN Throttle
	4.	Aging Timeout			3. Resets
			1.			Reset Device
	3. Protocol Parameters (FR)		2.			Reset LAN
1.		Self Learn	3.			Reset WAN

2.Maintenance Protocol

3.DLCI

4.CIR

5.EIR

3.Protocol Parameters (PPP)

1.Header and Control Field Compression

2.Protocol Field Compression

3.Authentication Protocol

4.Security Host/Guest

5.User Name To Send

6.Password To Send

7.User Name To Accept

8.Password To Accept

4.Multicast

1.Multicast Forwarding

2.Static Groups

5.View

1.Configuration and Connection

2.ARP Tables

3.Multicast Groups Table

4.Statistics

6.Diagnostic Tool PING Terminal

1.Ping IP Address

2.Start Pinging

3.Stop Pinging

Figure C-5. Management Utility, Menu Structure

C.7 Quick Setup Menu

The Quick Setup menu is used to select the main parameters’ values that must be defined before you start using IR-IP.

Use the Advanced Setup menu (see the Advanced Setup Menu section below) to specify values for other IR-IP configuration parameters not included in this menu.

➤To access the Quick Setup menu:

• From the Main menu, type 1.

The Quick Setup menu appears (Figure C-6).

C-10 Quick Setup Menu