RAD Data comm E1, T1 5.2 Power Supply

Chapter 5 FOM-E1/T1/R Card Version FOM-E1/T1 Installation and Operation Manual
5-2 Power Supply
Terminal
Block
CIA/TB-BNC/214
Terminal
Block
Figure 5-1 ASM-MN-214 Rear Panel
5.2 Power Supply
The FOM-E1/T1/R card is powered from the ASM-MN-214 power supply via its
chassis. Each FOM-E1/T1/R card has two fuses that protect the entire system
against power failure due to a short circuit in one card (see Figure 5-4). The ratings
of the fuses are 1A, 250V and 50 mA 250V.
The ASM-MN-214 card cage can accept both AC and DC power supplies. LED
indicators located on the ASM-MN-214 front panel (see Figure 5-2) show activity
when the power supply is connected to the mains plug. The power supply
supports the full card cage with any combination of cards.
AC Supply
The AC power supply of the ASM-MN-214 is 100, 115, or 230 VAC, ±10%,
47 to 63 Hz.