Edacs Trunking Setup | Radio Shack 20-164 instruction

6.If necessary, use the number keys to enter a new Offset frequency and press ENT. The S in Step blinks.

If you try to program an offset frequency in the UHF-Hi bands (806-960 MHz), the scanner ignores the entry.

7.While the S in Step blinks, repeatedly press  or  to select the step number: 5.0, 6.25, 10.0, 12.5, 15.0, 18.75, 20.0, 25.0, 30.0, 31.25, 35.0, 37.5, 40.0, 43.75, or 50.0 kHz, then press ENT.

8. Press PGM.

UHF-Hi (806-960 MHz)

To program 800 MHz Motorola trunking:

1.Press PGM then TRUNK to enter the ID program mode.

2.Press FUNC, then press  or . The bank number increases or decreases by one. If you hold down  or , the bank number increases or decreases continuously.

3.If necessary, repeatedly press MODE to select “Motorola.”

4.Press FUNC then 3. NORMAL appears.

5.Press  or  to select NORMAL or SPLINTER and press ENT. If you are uncertain about the base frequency, use

NORMAL.

The base frequency in NORMAL is 851.0125 MHz. The base frequency in SPLINTER is 851.0000 MHz. . If you cannot receive with the NORMAL setting, change to SPLINTER.

EDACS Trunking Setup

EDACS (GE/Ericsson) systems transmit Talk

G S c g c e s f i l

L

L R p r s t u d

L t

T

1

2

3

4

36

Image 36

Radio Shack 20-164 manual Edacs Trunking Setup, UHF-Hi 806-960 MHz To program 800 MHz Motorola trunking

Contents

What’s Included Triple Trunking Contents Contents Volume / OFF Your Scanner Connecting the Antenna Attaching the Belt ClipTo attach the supplied antenna Powering Your Scanner Batteries To install batteries To charge batteries External Power To use an external power source Headphones and Speakers Keytones and Keylock Backlight and ContrastTo set the keytone To lock the keypad To change the backlight mode Squelch and AttenuatorTo turn on the backlight To change the display contrast To set the attenuator mode To set squelch Scanner Setup DelayTo turn the delay on / off Defining a Channel To define a channel Copying a Frequency To copy a frequency Deleting Saved Frequencies To delete a saved frequencyTo delete all saved frequencies in a bank Scanner Cloning To define a channel’s Ctcss or DCS codeTo save a Ctcss or DCS code Searching Seek SearchTo clone the scanner data To activate Seek Search Search Banks To search preprogrammed search banks Zeromatic To search banks SR0-SR2 Signal Stalker Programming a Search RangeTo activate Zeromatic To program the search range of Bank SR7 Special Signal Stalker To use Signal Stalker To use Special Signal Stalker Locking Out FrequenciesTo lock out a frequency To review and unlock frequencies Saving Found Frequencies To unlock all frequencies in a search bankTo save a frequency found during a search Scanning Locking Out ChannelsTo scan To locked out a channel To turn on the priority feature Priority ScanningTo review all locked out channels Weather Alerts To make an existing channel a Priority channelTo modify the Priority channel Same Standby Mode To perform a weather scanTo program a weather channel into priority channel To program a Fips code Code. The format of a Fips code is To review stored Fips codes Skywarn To enter Same standbyTo test the weather alert Monitoring To use SkywarnTo monitor a channel To find a frequency to monitor Trunking Setup To set a default tuning frequencyDefining a Trunking Bank To define a Trunking Bank Motorola Trunking Setup To set Open or Closed mode for a bankTrunking Modes Fleet Maps To program a fleet map Base and Offset Frequencies For Motorola Type II, enter Edacs Trunking Setup UHF-Hi 806-960 MHz To program 800 MHz Motorola trunking LTR Trunking Setup To save a correct Home Repeater Searching for Talk Group IDs Saving a Talk Group IDTo search for Talk Group IDs Deleting Talk Group IDs To define a Talk Group ID Saving Trunking Channels To delete a Talk Group IDTo delete ALL talk group IDs in a bank Trunk Scanning To change the scanning direction, press  or  Trunking Delay To set a Talk Group ID delayLocking Out Talk Group IDs To lock out Talk Group IDs Turning Off Sub-Banks To review locked-out Talk Group IDsTo turn off a sub-bank To turn off a sub-bank while scanning Scanner Maintenance Talk Group ID HoldText Tags To set Talk Group ID HoldPage Troubleshooting To display the Talk Group IDScanner is not Working at all Scanner does not Receive any stations Or reception is poorScanner is on but Does not scan Birdie Frequencies Service and Repair Initializing the ScannerTo initialize the scanner Scanning Legally FCC Notice References Appendix a GlossaryAppendix B Search Banks Search bank SR1 CB band Receive mode AM Search bank SR2 FRS/GMRS/MURS band Search bank SR4 Aircraft Receive mode AM, FM Appendix C Ctcss / DCS Codes Ctcss Codes Appendix D Signal Stalker Bands All BandDCS Codes PubSafety Band Appendix E Talk Group Format MotorolaTo use AFS format Appendix F Specifications 406-512 MHz 764-960 MHz 9V DC Limited One-year Warranty