![](/images/new-backgrounds/1204027/20402797x1.webp)
Initializing the Scanner
If the scanner’s display locks up or does not work properly after you connect a power source or install batteries, you might need to initialize it.
Caution: This procedure clears the scanner’s memory. Initialize the scanner only after trying all other methods to correct issues.
To initialize the scanner:
1.Turn off the scanner, then turn it on again.
2.While
3.Press 1.
4.Press ENT. “Initializing please stand by” appears for about 5 seconds. When the initialization is complete, M000 appears on the second line of the display. Bank 0 Ch 00 appears.
Do not turn off the scanner until the initialization is complete.
Service and Repair
If your scanner is not performing as it should, take it to your local RadioShack store for assistance. To locate your nearest RadioShack, use the store locator feature on RadioShack’s web site (www.radioshack.com), or call 1-
49