Radio Shack 4-in-One Smart Light-Up Remote Control Device Types, Setting UP Your Remote Control

15-1993.fm Page 6 Wednesday, October 20, 1999 12:03 PM

ies. This can press keys for an extended period of time and reduce the battery life.

DEVICE TYPES

You can use the remote control's device keys to control the following types of devices:

TV — TVs

VCR — VCRs and TV/VCR combinations CBL — Cable converters, satellite systems AUX — CD Players, Home Automation

SETTING UP YOUR REMOTE CONTROL

1.Refer to “Manufacturer Codes” on Page 17 and write down the codes for your brand of device on the 4-in-One’s label.

Note: Some manufacturers have several codes listed. Try each until you find the right one. See “If You Have Problems” on Page 14 if you cannot find the correct code.

2.Press the device key for the type of remote you are replacing (TV, VCR, CBL, or AUX). The red light blinks.

3.Hold down P until the red light blinks twice, then enter the 4-digit manufacturer's code.

For example, to replace a Panasonic TV's remote control (manufacturer's code 0051), press TV, hold down P until the red light blinks twice, then press 0 0 5 1.

When the red light blinks twice, the remote control has accepted the code.

Note: If the code you entered is invalid, the red light blinks.

6