Radio Shack 43-1204 Setting The Dialing Mode, 4SET MODE ?, 3FEATURE SW. ?, Tone, 10PPS

43-1204.fm Page 10 Wednesday, August 18, 1999 8:45 AM

•Avoid applying tape to image areas on copies. The chemicals in some transparent tape adhesives could fade the image.

•Avoid storing two copies with the images together. The printed image can transfer from one copy to the other.

•Do not touch the thermal paper with sweaty or dirty hands.

If the dial tone continues, you have pulse service. Follow these steps to set your fax to the pulse dialing mode.

1.Press MENU four times. The fax machine displays:

4:SET MODE ?

2.Press SET, then press MENU twice so the fax machine displays:

SETTING THE DIALING MODE

The TFX-1032 is factory-set to the tone dialing mode. If your telephone line uses pulse dialing, you must change the dialing mode setting. If you are not sure which type of service you have, do this test.

1.Lift the handset and listen for a dial tone.

2.Press any number other than 0.

Note: If your phone system requires that you dial an access code (9, for example) before you dial an outside number, do not press 0 or the access code.

If the dial tone stops, you have tone service.

10

3:FEATURE SW. ?

3.Press SET twice so the fax machine displays:

TONE (00)

4.Press 0 1 to select the pulse mode. The fax machine displays:

10PPS (01)

5.Press SET to save your selection. The fax machine displays:

(01)PAUSE TIME

6.Press STOP/CLEAR twice. The fax machine displays the date and time (or CHECK PAPER ROLL if you have not installed paper).