Mute
The mute function allows you to hear the other party but the other party cannot hear you.
1.During a call, press MUTE/REMOVE on the handset. The handset screen shows MUTED for a few seconds. MUTE appears at the bottom of the screen until the mute function is turned off.
2.Press MUTE/REMOVE again to resume the conversation. The handset screen temporarily shows
MICROPHONE ON.
PHONE 0:00:00
MUTED
MUTE
Ringer Mute
When the telephone is ringing, press OFF/CLEAR or MUTE/REMOVE to temporarily silence the ringer without disconnecting the call. The next call rings normally.
RINGER MUTE
Call Waiting
If you subscribe to call waiting service from your telephone company, you hear an alert tone if there is an incoming call while you are on another call.
Press 
/FLASH to answer the new incoming call. Press 
/FLASH again to return to the original call.
Find Handset
Use this feature to page all system handsets.
Press FIND HANDSET on the telephone base. All idle handsets ring and the screens show ** PAGING **.
To end paging, press 
/FLASH, 
, any dialing keys
Chain Dialing
Use this feature while already dialing one phone number or while on a call to initiate a dialing sequence from numbers stored in the directory, stored in the call log, or from the most recent redial phone number. Chain dialing can be useful when accessing numbers other than phone numbers (such as bank account information or access codes).
Telephone Operation
19
