Radio Shack 43-3543, 43-3533, 43-3541 #86*5+05647%6+105 +0641&7%6+10, +056#..#6+10, Introduction

Introduction

#"+/2146#06"#

•Cordless phones such as this one require AC power to operate. When the power is off, you cannot make or receive calls using your phone. To be safe, you should also have a phone that does not need AC power to operate (not a cord- less phone), so you can still make and receive calls if there is an AC power failure.

•When AC power is lost, the phone loses the security access-protection code con- nection between the base and the handset. When power is restored, put the handset on the base briefly to restore this connection so you can use the handset.

•Your phone operates on standard radio frequencies as allocated by the FCC. It is possible for other radio units operating nearby on similar frequencies to unintentionally intercept your conversation or cause interference. This possible lack of privacy can occur with any cordless phone.

."%#76+10".

You must use a Class 2

!power source that supplies 9V DC and

delivers at least 210 mA. Its center tip must be set to positive and its plug must fit the phone's DC IN 9V jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the phone or the adapter.

•Always connect the AC adapter to the phone before you connect it to AC power. When you finish, disconnect the adapter from AC power before you disconnect it from the phone.

4.Exercise care in handling the battery pack in order not to short it with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.

5.Charge the battery pack provided or identified for use with this product only in accordance with the instructions and limitations specified in the instruction manual provided for this product.

6.Observe proper polarity orientation between the battery pack and battery charger.

5#8'"6*'5'"+05647%6+105

+0641&7%6+10

Thank you for purchasing the RadioShack 900 MHz Cord- less Telephone. Your phone uses the 900 MHz band for less interference, clearer sound, and greater range than 46/49 MHz cordless telephones. Its headset jack means you can connect an optional headset for hands-free convenience. #

+056#..#6+10

You can place the phone on a desk or table, or mount it on a standard wall plate or directly on a wall. Select a location that is:

•near an accessible AC outlet

•near a telephone line jack

•out of the way of normal activities

•away from electrical machinery, electrical appliances, metal walls or filing cabinets, wireless intercoms, alarms, and room monitors

•away from other cordless phones

The base’s location affects the handset’s range. If you have a choice of several locations, try each to see which provides the best performance..

Your telephone connects directly to a modular telephone line jack. If your telephone wiring does not have a modular jack, you can update the wiring yourself using jacks and adapters (available at your local RadioShack store or online at RadioShack.com), or have the telephone company update the wiring for you. You must use compatible modular jacks that are compliant with Part 68 of FCC Rules. The USOC number of the jack to be installed is RJ11C (or RJ11W for a wall plate jack).

4