Radio Shack 43-3548 owner manual Choosing the dialing mode, Area Code

Ô NOTE Ô

Area Code

•If your calling area requires 10-digit dialing, do not program this option.

•When the area code has already been stored in memory, the stored area code will be displayed. To change it, use the DELETE/ CHANNEL and number keys to enter the new area code.

•Then press SELECT. A confirmation tone sounds. To complete the setting, press end or return the handset to the base unit.

Choosing the dialing mode

Make sure your battery pack is fully charged before choosing the dialing mode.

Operation

AREA CODE

If you enter a 3-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. Do not program this option, if your calling area requires 10-digit dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full 10-digit number.

1.When the phone is in the standby mode, press and hold CID/MENU. The Caller ID setting screen appears.

2.Press VOL dkey twice to select ¨Area Code¨.

3.Press SELECT.

4.Use the number keys (0 - 9), or DELETE/CHANNEL to enter the 3-digit area code.

5.Press SELECT. A confirmation tone sounds and the displayed area code is entered.

6.Press end or return the handset to the base unit to complete the setting. The handset returns to the standby mode.Ô

Choosing the dialing mode

Most phone systems use tone dialing which sends DTMF tones through the phone lines. However some phone systems still use pulse dialing such as in rural areas. Ô

The default setting is tone dialing. Depending on your dialing system, set the mode as follows:

18