3.Press MEM or SELECT. The screen appears with the memory location number that you have selected in the display.
4.Press VOL e or VOL d keys to select
¨Edit MemoryXX¨, then press MEM or SELECT. The cursor flashes indicating that the display is ready for the name to be edited. When a name has not been stored, the cursor appears at the beginning of the second line.
5.Use the number keys, 
/tone/f, #/g keys, or DELETE/CHANNEL to edit the name. (See page 22.) To edit only the phone number, skip this step.
6.Press MEM or SELECT. The cursor flashes indicating that the display is ready for the number to be edited.
7.Use the number key, REDIAL/PAUSE or
DELETE/CHANNEL to edit the phone number. The phone number cannot exceed 20 digits. (See page 24.)
If you don´t want to change the phone number, skip this step.
8.Press MEM or SELECT. If you changed either name or phone number, a confirmation display shows up. If it is correct, press VOL ekey to select “Yes” and press SELECT. You hear a confirmation tone. The memory storage is complete.
For example, if you store a name and number into memory location number 01, the display shows ¨Memory01 Stored¨. After about 2 seconds, Select Memory Screen is displayed.
Operation
25
