Setting the Ringer Tone and Volume | Radio Shack 43-3578 manual

•The supplied battery pack should last for about a year. If the battery pack does not hold a charge for more than 2 hours after an overnight charge, replace it with a new 3.6-volt, 600 mAh battery pack with a connector that fits the socket in the battery compartment. You can order a replacement battery pack through your local RadioShack store. Install the new battery pack and charge it for about 15–20 hours.

SETTING THE RINGER TONE AND VOLUME

You can select one of five different ringer tone/volume settings on the handset. Lift the handset and repeatedly press VOL/ or VOL/ to select the desired ringer setting. Each time you press the button, the phone rings at the selected setting and the display shows Ring Type A High, Ring Type A Low, Ring Type B High, Ring Type B Low, or Ringer

Off.

Installation

15

Image 15

Radio Shack 43-3578 owner manual Setting the Ringer Tone and Volume

Contents

With Caller ID/Call Waiting 900MHz Cordless Telephone Contents Introduction FCC Statement Important Information Important Information Surge Protection Important Safety Instructions Caller ID Information Selecting a Location Installation On a Wall Plate or Wall On a Desk Top Supplied AC EPA certified Rbrc Battery Recycling Seal on CONNECTING/CHARGING the Battery Pack Before you try to charge it. The CHARGE/IN USE Recharging the Battery Pack Installation Setting the Ringer Tone and Volume Turning Caller ID/CALL Waiting ON/OFF Turning Auto Talk Press VOL/ twice to move the cursor to Area Code Storing Your Area Code Setting the Dialing Mode Selecting the Language Making and Receiving Calls Operation Adjusting HANDSET’S Volume Using RedialSelecting the Channel Using Flash Using Tone Services on a Pulse LineMuting the Ringer Paging Voice Mail Waiting Indicator To remove the beltclip Installing the BeltclipUsing a Headset To attach the beltclip Storing a Number and Name in Memory Memory Dialing Memory Dialing Memory XX Stored appears Editing or Deleting a Number in Memory Entering a Pause Reviewing Memory Numbers Dialing a Memory Number CHAIN-DIALING Service Numbers Testing Stored Emergency Numbers Speed DialingStoring a Number in Speed Dial Dialing the Speed Dial Number Editing the Speed Dial NumberDeleting the Speed Dial Number Caller ID Operation Reviewing Caller ID Records Data Caller ID Messages Dialing Numbers from a Caller ID Record ADDING/DELETING the Area Code Storing a Caller ID Record in Memory Deleting a Single Caller ID Record Deleting All Caller ID RecordsDeleting Caller ID Records Troubleshooting Keep the handset away Move the base away from Care Service and RepairPage RadioShack Corporation