1.Insert the two tabs at the top of
the narrow end of the supplied bracket into the base’s upper tab slots, then press down on the
bracket’s latches and insert them into the lower slots.
2.Plug one end of the supplied modular cord (short for a wall plate, long for direct wall mounting) into the TEL LINE jack on the base’s back.
3. Insert the | DC IN 9V TEL LINE | |
supplied AC | ||
| ||
adapter’s |
| |
barrel plug into |
| |
the DC IN 9V |
| |
jack. |
|
4. Route the adapter and
modular cords through the bracket’s grooves.
5.For a wall plate, plug the modular cord’s other end into the wall plate jack, then align the bracket’s keyhole slots with the wall plate studs and slide the base downward to secure it.
Installation
11
