Solving Common Problems

Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call.

Problem

Explanation/Solution

 

 

 

 

The air conditioner does not

Check that the circuit breaker used for the air conditioner has not been

operate at all triggered.

triggered.

 

Check that the power cable is plugged into a wall socket and the

 

socket is switched on, if necessary.

 

Check that the operating mode indicator(COOL, FAN or HEAT) on

 

the unit is lit up; if necessary press

 

(On/Off) on the remote control

 

 

 

 

 

or unit.

 

 

 

 

The air conditioner does not

Check that there are no obstacles between you and the unit.

operate with the remote control

Replace the remote control batteries if necessary.

 

Check that you are close enough to the unit (seven metres/yards

 

or less).

No beep is heard when you press

Check that you are pointing the remote control at the remote

 

(On/Off) on the remote control

control sensor on the unit.

 

 

Replace the remote control batteries if necessary.

 

The air conditioner does not cool or

Check that the correct operating mode has been selected

 

heat.

COOL or HEAT.

 

 

The room temperature may be too low or too high.

 

 

Dust may be blocking the air filter; refer to page 17 or 18 for

 

 

cleaning instructions.

 

 

Check that there is no obstacle blocking the air flow into or out of

 

 

the unit.

 

 

 

 

 

 

When heating, the required room

Check that the required temperature has been set correctly.

 

temperature is never reached and

Increase the fan speed.

 

the air conditioner frequently stops

If the air flow is directed downwards, direct it upwards.

 

 

 

 

 

 

The air flow direction does not

Check that the air conditioner has been switched on; if necessary,

 

change when you press AIR SWING

press

 

(On/Off) on the remote control or unit.

 

 

 

 

 

 

 

 

 

 

The timer is not correctly triggered

Check that the timer has been programmed correctly;

 

 

see page 12~14.

 

 

 

 

 

 

Odours are permeated in the room

Air the room.

 

during air conditioning

 

 

 

 

 

 

 

 

Technical Specifications

Design and specifications are subject to change without notice.

Model

Power Supply

 

 

✴✴✴✴✴✴✴ EA/EB

220-240V~, 50Hz

 

 

ENGLISH

E-19