Airing Your Room
If the atmosphere in your room is stale, you can air it using the Fan feature and if necessary, evacuate the stale air outside.
1 If you wish to evacuate stale air outside, push the ventilation lever on the front of the unit to the right and the open position ( 
).
Result: | The air inside the room circulates and stale air is evacuated outside. |
Otherwise, push the ventilation lever to the left and the closed position ( 
).
Result: | The air simply circulates inside the room. |
Remote Control | Control Panel |
2If necessary, press the 
(On/Off) button.
Result: | ◆ | The operating mode indicator (COOL, FAN or HEAT) on the |
|
| unit comes on. |
| ◆ The air conditioner starts up in the mode selected | |
|
| when the unit was last used. |
| ◆ | The unit beeps twice. |
3 If the FAN indicator is not lit up on the unit:
◆ Press the 
button on the remote control or
◆ Press the MODE button on the unit one or more times until the FAN indicator lights up
Result: | ◆ | The unit beeps each time you press MODE. |
| ◆ | The air conditioner starts up in Fan mode. |
➢◆ You can change modes at any time.
◆When the air conditioner is in Fan mode, the temperature is not displayed; in this case, you do not need to set the temperature.
4 | To set the fan speed to... | Then... |
| ||
| High |
| ◆ | Press the | button on the remote control. |
|
|
|
| or |
|
|
|
| ◆ | Press the | on the unit until the |
|
|
|
| indicator lights up | |
| Med |
| ◆ | Press the | button on the remote control. |
|
|
|
| or |
|
|
|
| ◆ | Press the | on the unit until the |
|
|
|
| indicator lights up | |
| Low |
| ◆ | Press the | button on the remote control. |
|
|
|
| or |
|
|
|
| ◆ | Press the | on the unit until the |
|
|
|
| indicator lights up | |
| Result: | Each time you press a button, the unit beeps. | |||
5To control the direction of the air flow, refer to page 11.