Heating Your Room
| You must select the Heat mode if you wish to heat your room to a specific |
|
|
| temperature. You can also set the fan speed. | Remote Control | Control Panel |
1If necessary, press the 
(On/Off) button.
Result: | ◆ | The operating mode indicator (COOL, FAN or HEAT) on |
|
| the unit comes on. |
| ◆ | The air conditioner starts up in the mode selected |
|
| when the unit was last used. |
◆The unit beeps twice.
☛The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Plugged in
◆Stopped
It will start up automatically after about three minutes.
2 | If the HEAT indicator is not lit up on the unit: | ||||
| ◆ Press the |
|
| button on the remote control | |
|
|
| |||
| or |
|
|
|
|
| ◆ Press the MODE button on the unit one or more times until the HEAT | ||||
| indicator lights up | ||||
| Result: | ◆ | The unit beeps each time you press MODE. | ||
◆The air conditioner starts up in Heat mode.
➢You can change modes at any time.
3 To adjust the temperature, press the 
or 
button on the remote control one or more times until the required temperature is displayed.
To adjust the temperature, press the 
or 
button on the unit one or more times until the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result: | ◆ Each time you press the temperature buttons: |
| – The temperature is adjusted by 1°C and |
| displayed on the control panel |
| – The unit beeps |
| ◆ The air conditioner starts heating if the room temperature is |
| lower than the selected temperature. |
4 | To set the fan speed to... | Then... |
|
| High | ◆ Press the | button on the remote control. |
|
| or |
|
◆Press the 
on the unit until the 
indicator lights up
Med | ◆ Press the | button on the remote control. |
| or |
|
◆Press the 
on the unit until the 
indicator lights up
Low | ◆ Press the | button on the remote control. |
| or |
|
◆Press the 
on the unit until the 
indicator lights up
Result: Each time you press a button, the unit beeps.
5To control the direction of the air flow, refer to page 11.
ENGLISH