Setting the Dialing Mode | Radio Shack 43-3578 specs

Installation

! IMPORTANT !

In some areas, the area code is necessary even for a local call. If you live in such an area, do not store the area code.

Ô NOTE Ô

If your phone system requires that you dial an access code (9, for example) before you dial an outside number, do not dial the access code.

3.Press SEL, then enter your three- digit area code. If you make a mistake, use the DEL/CH to erase the wrong number, then enter the correct number.

4.Press SEL to store the area code, then return the handset to the base (or press END) to clear the display. !

SETTING THE DIALING MODE

Your phone is set for tone dialing. If you have pulse service, change the dialing mode. If you are not sure which type of service you have, do this test.

1.Lift the handset, press TALK/ FLASH, and listen for a dial tone.

2.Press any number other than 0. Ô

If the dial tone stops, you have touch-tone service. If the dial tone continues, you have pulse service.

3.Press END.

Follow these steps to set the dialing mode.

1.Lift the handset then hold down CID/MENU until the menu appears with Auto Talk selected.

18

Image 18

Radio Shack 43-3578 owner manual Setting the Dialing Mode

Contents

900MHz Cordless Telephone With Caller ID/Call Waiting Contents Introduction Important Information FCC Statement Important Information Surge Protection Important Safety Instructions Caller ID Information Installation Selecting a Location On a Desk Top On a Wall Plate or Wall Supplied AC CONNECTING/CHARGING the Battery Pack EPA certified Rbrc Battery Recycling Seal on Recharging the Battery Pack Before you try to charge it. The CHARGE/IN USE Installation Setting the Ringer Tone and Volume Turning Auto Talk Turning Caller ID/CALL Waiting ON/OFF Storing Your Area Code Press VOL/ twice to move the cursor to Area Code Setting the Dialing Mode Selecting the Language Operation Making and Receiving Calls Adjusting HANDSET’S Volume Using RedialSelecting the Channel Using Flash Using Tone Services on a Pulse LineMuting the Ringer Voice Mail Waiting Indicator Paging To attach the beltclip Installing the BeltclipUsing a Headset To remove the beltclip Memory Dialing Storing a Number and Name in Memory Memory Dialing Memory XX Stored appears Entering a Pause Editing or Deleting a Number in Memory Reviewing Memory Numbers CHAIN-DIALING Service Numbers Dialing a Memory Number Testing Stored Emergency Numbers Speed DialingStoring a Number in Speed Dial Dialing the Speed Dial Number Editing the Speed Dial NumberDeleting the Speed Dial Number Caller ID Operation Reviewing Caller ID Records Caller ID Messages Data ADDING/DELETING the Area Code Dialing Numbers from a Caller ID Record Storing a Caller ID Record in Memory Deleting a Single Caller ID Record Deleting All Caller ID RecordsDeleting Caller ID Records Troubleshooting Keep the handset away Move the base away from Service and Repair CarePage RadioShack Corporation