Caller ID Operation
Ô NOTE Ô
If a Caller ID record does not contain a phone number (if it was blocked by the caller, for example), you cannot dial from that record.
ADDING/DELETING THE AREA CODE
The display shows the area code of an incoming call, unless the call comes from the area code you stored (see “Storing Your Area Code” on Page 17). You can add the area code to the display or delete it. With the record displayed, press 3 to add or delete the area code.
Numbers are stored in memory as they appear on the display, with or without the area code. Numbers in Caller ID records remain the same, even if you add or delete the area code.
DIALING NUMBERS FROM A CALLER ID RECORD
To dial a local number stored in a Caller ID record, recall the record, then press
TALK/FLASH.
To add or delete the area code, press 3 before you press TALK/FLASH.
If the call is long distance, press 1 (1 appears before the displayed number) before you press TALK/FLASH.
Ô
36
