Using an Optional Handset
∀ CAUTION ∀
You must use a Class 2 power source that supplies 9V DC and delivers at least 210 mA. Its center tip must be set to positive and its plug must fit the charger DC IN 9V jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the handset or the adapter.
Always connect the AC adapter to the charger before you connect it to AC power. When you finish, disconnect the adapter from AC power before you disconnect it from the charger.
Ô NOTE Ô
•If you mounted the base on the wall, place the handset with the keypad facing out.
•You must
•If you set CW Deluxe on the optional handset to
On while CIDCW on the base handset is set to Off, the Caller ID/Call Waiting information does not appear on the optional handset, but you can still recall and use the CW Deluxe menu.
3.Press # or ∃ to move the cursor to Yes. Then press SEL/CH or DEL/TRSF. The phone beeps to indicate the record is deleted.
USING AN OPTIONAL HANDSET
You can add up to eight additional handsets (Cat. No.
CHARGING THE BATTERY PACK
The charger is powered by the supplied 9V, 210 mA AC adapter. Insert the supplied AC adapter's barrel plug into the DC IN 9V jack on the back of the charger. Route the cord through the strain relief slot and plug the adapter into a standard AC Outlet.
∀
Be sure you have connected the battery pack as described in "Connecting and Charging the Battery Pack" on Page 9. Then place the handset on the charger. The CHARGE indicator on the charger lights. Total:0 and HS2 appear on the display while the handset is charging. Ô
The second handset supplied with
You can use the optional handsets in the same way as the base handset with a few exceptions. The
30
