SETTING THE DIALING MODE
Your phone is set for tone dialing. If you have pulse service, change the dialing mode.
If you are not sure which type of service you have, do this test:
1.Lift the handset and press TALK/FLASH. Listen for a dial tone.
2.Press any number other than 0 or an access code (9, for example) if required.
3.If the dial tone stops, you have
If the dial tone continues, you have pulse service.
Once you know which type of service you have, follow these steps to set the dialing mode.
1.Lift the handset and press MENU/MUTE.
2.Press # or ∃ to select Dial Mode.
3.Press SEL/CH. The current dialing mode appears.
4.Press # or ∃ to select the mode.
5.Press SEL/CH. The phone beeps.
6.Press END to exit.
SETTING THE RINGER VOLUME
1.Lift the handset and press MENU/MUTE. The menu appears with Ringer Volume selected.
2.Press SEL/CH.
3.Press # or ∃ to select Ringer Off, Ringer Low, or Ringer High. Each time you make a selection, the phone rings at the selected volume (or does not ring when you select Off).
Installing Your Telephone
11
