Radio Shack 43-3529, 43-3598 owner manual Using Tone Services on a Pulse Line, Paging

2.Press TALK/FLASH again to return to the first call.

If you do not have any special phone services, pressing TALK/FLASH while the call is in progress might disconnect the current call.

USING TONE SERVICES ON A PULSE LINE

Some special services require tone signals (such as bank-by-phone). If you have pulse dialing, you can still use these special tone services.

1.Dial the service’s main number.

2.When the service answers, press ∗/ TONE. The phone automatically inserts a two-second pause, so any additional numbers you dial are sent as tone signals.

The phone’s dial mode resets to pulse when you make or receive another call.

PAGING

1.To send a page from the base to the handset or to locate the handset when the phone is not in use, press PAGE on the base. The handset beeps for about one minute.

2.To stop the page, press any key on the handset, or press PAGE on the base again.

If you receive an incoming call, Page is cancelled.

Making and Receiving Calls

17