Radio Shack 43-3823 owner manual Handset Ringer Tone, Earpiece Volume, Temporarily Mute Ringer

ADJUSTING THE HANDSET RINGER AND EARPIECE VOLUME

Handset Ringer Tone

When the phone is in standby mode, press VOL/ RING repeatedly to listen to the two ringer tone options.

Earpiece Volume

The handset earpiece volume settings (Low, Medium and High) can only be adjusted during a call. Press VOL/RING repeatedly to select Low, Medium and High. When you hang up, the phone keeps the last volume setting selected.

Temporarily Mute Ringer

If the handset is off the base, simply press end to temporarily mute the incoming ring. The ringer will sound with the next incoming call.

REDIAL

The REDIAL/PAUSE key redials the last number dialed. The redialed number can be up to 24 digits long.

TONE DIALING SWITCH-OVER

Some telephone companies use equipment that requires pulse dialing (sometimes referred to as rotary dialing). If you need to enter tone dialing digits, you can switch-over to tone dialing during the call. For example, entering your bank account number after you have called your bank. Ô

Initially make your call with the pulse dialing mode. Once your call connects, press ∗/tone. Enter the desired number. These digits will be sent as tone dialing. Once the call ends, the tone mode is canceled and pulse dialing mode resumes.

Operation

Ô NOTE Ô

•The tone feature only applies when the dial mode is set to pulse.

•This special number can be stored in a memory location. This is referred to as Chain Dialing (See page 15).

13