CONT (Contrast) — Adjusts the contrast be- tween the dark and light parts of the picture.
BRT (Brightness) — Adjusts the overall brightness of the screen.
AUDIO (Volume) — Adjusts the sound vol- ume picked up by all camera microphones.
Using the Monitor Microphone
If you use the monitor with a camera capable of
1.Hold down TALK. The TALK indicator lights. Speak into the MIC located beneath the screen in the lower right corner.
Note: Pressing TALK interrupts the scanning of each connected camera.
2.When you finish speaking, press AUTO to resume scanning all cameras, if desired.
Using a VCR
To record the audio and video input from each camera, you can connect a VCR equipped with separate audio and video in- put jacks to the monitor . You can then play back the recording on the monitor or on a standard TV equipped with AV input jacks.
To record the sound and picture from your cameras, connect the monitor’s V OUT and A OUT jacks to the audio and video input
jacks of your VCR using
Monitor
VCR
If you plan to play the recorded tape through the monitor, connect the monitor’s V IN and A IN jacks to the VCR’s audio and video out- put jacks using a
VCR Recording
Follow these steps to record the input from one or more cameras.
1.Turn on the system and the VCR.
2.Load a blank video cassette, or one you want to record over, into the VCR.
3.Most VCRs have either a separate switch or
Note: If your VCR has no provision for recording a separate external source, special accessories are available at your local RadioShack store.
4.Select the desired recording speed and other settings on your VCR.
5.Begin recording.
Operation | 5 |
