C O M M E R C I A L P R O D U C T S D I V I S I O N
Numbers 1 through 10 can appear. Number 1 identifies the most recent error.
Diagram 10 Error log display.
1
Error code |
|
| ER21 |
| |
Odometer | 123456 REVS | 1714 HOURS | |||
reading |
|
|
|
|
|
(shown in |
|
|
|
|
|
revolutions) at |
|
|
|
|
|
the time the |
|
|
|
|
|
error occurred |
|
|
|
|
|
| CO |
|
|
| CE |
| URS |
| TAN | ||
|
| E CH | RESIS |
| |
|
|
| ANGE |
|
|
The number of hours that the cycle has been in use when the error occurred.
Press ENTER once again and the Error Log appears. Press the ▼ or ▲ key to view the error messages. Error logs are recorded historically.The C846 can store up to 10 error messages. Useful information, describing the different aspects of the error message, appears in Diagram 10.
Note: To clear (delete) the error logs, press QUICKSTART for at least four sec- onds while viewing the list. Prompts appear on the display and let you know when the error messages have been deleted (“cleared”) from memory.
Important:You cannot retrieve the error log once you have deleted it.
To return to the Precor banner, press RESET. To view the cycle’s serial number, press ENTER.
If you pressed ENTER, the field name Serial Number appears briefly and then the cycle’s serial number appears. This number is useful when contacting Customer Support.
To return to the Precor banner, press RESET or ENTER.
USING CSAFE STANDARD EQUIPMENT
The C846 is fully compatible with CSAFE protocols. Once the unit is connected to a CSAFE master device and the user maintains a pedal speed above 20 revolutions per minute, the user is prompted to enter a user ID.
Note: If the optional battery recharger is plugged into the C846 and connected to an appropriate power source, then no pedaling is necessary for user ID entry.
page 20
