Precor C846 owner manual M M E R C I a L P R O D U C T S D I V I S I O N

C O M M E R C I A L P R O D U C T S D I V I S I O N

REMAININGTIME : Indicates the amount of time, in minutes and seconds (mm:ss), that remain in the course.When a user enters a cool down period, the Remaining Time resets to five minutes and begins counting down from there.

Note: If the club has set the Workout Time Limit as NO LIMIT and the user inputs 0 using the numeric keys at the time prompt, then no information appears in the Remaining Time field. See Setting a Workout Time Limit on page 17.

SPEED: The displayed value is an estimate of “linear speed” even though the cycle is stationary.The value is determined by converting the user’s current RPM and resistance settings into an estimate for miles per hour (or kilometers per hour). Refer to Changing the Units of Measure.

METS: Displays the metabolic equivalents of the user’s current energy expendi- ture level. A MET’s level of 1 represents the body at rest. Note that when a user reduces pedaling intensity, the MET’s value begins to drop toward zero because the displayed information no longer corresponds to the user’s MET’s level.

WATTS: Indicates the amount of energy the C846 is currently generating and is derived from the current resistance and pedaling speed.

SEGMENT TIME: In the Manual or preprogrammed courses, this display indi- cates the amount of time, in minutes and seconds (mm:ss) that remains in the highlighted column (or segment) of the course profile before the next column begins blinking. If the course being used is Interval or Weight Loss, then the number appearing in this display indicates the amount of time that remains in the current interval.

RESISTANCE: Displays the amount of resistance being applied to the pedals. The RESISTANCE ▼ and ▲ keys let the user set a resistance between 1 and 25 which affects the amount of resistance applied by the brake. Once a course is begun, a user can also use the numeric keys to designate the resistance. Refer to Numeric Keys on page 27.

Note: A user can check the resistance (when it is not the chosen display) any time during a workout by lightly pressing either RESISTANCE ▼ or ▲ key for less than two seconds. Pressing the RESISTANCE ▼ or ▲ key for more than two seconds causes the resistance level to change.

AVERAGE SPEED:The estimated “mid-point” in linear speed at which the user is traveling even though the cycle is stationary. The displayed value relates to the total workout time divided by the total accumulated distance.The average speed only appears when a user selects it by pressing the appropriate CHANGE key.

CALORIES PER MINUTE: Indicates the approximate number of calories being burned per minute.

page 25