C O M M E R C I A L P R O D U C T S D I V I S I O N
Exercising on the C846
Once the C846 is assembled, it is ready to use.The
Club owner’s and managers note: This section of the manual is written for the user because it specifically explains how to work out on the cycle. Refer- ences are made in second person.
ADJUSTING THE SEAT
Before starting a workout, you should position the seat properly to avoid strain on your knees. The C846 Upright and C846 Recumbent have different seat adjust- ment instructions. Refer to the instructions below, for your particular unit.
•To check for proper seat position, straddle the C846. Sit on seat. Place your feet on the pedals.Your extended leg should be slightly bent at the knee in a 10 to 15 degree angle.
C846 Upright Seat Adjustment
1.Dismount and hold the post underneath the seat with one hand while you pull out the seat post adjustment pin with the other hand. See Diagram 13, #1.
2.Slide the seat post up or down into the desired position and then, release the seat post adjustment pin. Before sitting on the cycle, press down firmly on the seat to make sure that it does not slip and that it is secured.
Note: If you only plan to raise the seat, you can do so without pulling out the seat post adjustment pin. See Diagram 13, #2.
Diagram 13 | Adjusting the Seat. | 1 |
|
| |
| C846 Upright | 2 |
|
| |
| Seat post | 3 |
|
| |
| Seat post adjustment pin |
|
| “Pop Pin” |
|
| Seat post support |
|
| Seat adjustment handle |
|
| C846 Recumbent |
|
C846 Recumbent Seat Adjustment
1.Sit on the seat with your feet in the pedals. Pull the seat adjustment handle up while you bend your knees and slide the seat forward or backward along the seat rail (see Diagram 13, #3). Align the seat with one of the marks on the seat rail and release the handle.
2.Before continuing with your workout, sit in the seat and try to slide the seat along the rail. Make sure that it does not slip and that it is secured.
page 29
