Radio Shack 65, 64 owner manual Fm Page 20 Tuesday, July 20, 1999 537 PM

16-634.fm Page 20 Tuesday, July 20, 1999 5:37 PM

2.While holding down TV, enter the code number for your TV using the number but- tons Or, while holding down DSS/CABLE, enter the code number for your cable box or direct-to-home satellite receiver.

Precede a single-digit code number with a 0 — for example, 01, 02, and so on. To enter a three-digit number, press 100, then enter the second and third digits in the code number.

3.Try operating your TV and cable box or direct-to-home satellite receiver using the VCR’s remote control. First press TV or DSS/CABLE, then try pressing POWER,

INPUT, CH s or CH t, and VOL +/– for TV operation; or POWER and CH s or CH t for cable box or direct-to-home satellite receiver operation.

If the device does not function, repeat Step 2 and try other codes for the manufacturer. If it still does not function, you must use the original remote control supplied with your TV and cable box or direct-to-home satel- lite receiver.

To use the remote control, press the button for the device you want to control— TV, DSS/CABLE, or VCR. Then press the desired function button.

Notes:

•The codes you programmed might be erased if you remove the batteries from the remote control (to replace them, for exam- ple). If this happens, re-enter the codes after you replace the batteries.

•Some TVs, cable boxes, and direct-to- home satellite receivers might require that you manually turn on the power for that device.

•Your TV, cable box, or direct-to-home sat- ellite receiver might have functions that the VCR’s remote control will not operate.

•You can use the number buttons to select a channel number on your TV and cable box or direct-to-home satellite receiver. How- ever, some TVs and cable boxes or direct- to-home satellite receivers might require that you press DISP/ENT after entering the channel number.

•VOL +/– works to adjust the TV volume in any operation mode (VCR, TV, or DSS/ CABLE).

•When you press TV or DSS/CABLE then press MENU/ACTION or PROG, NOW TV/

CABLE/DSS MODE PLEASE PUSH VCR KEY ON REMOTE appears, and TV or CAbL flash for about 5 seconds then dis- appear. Press VCR to set the remote con- trol to VCR operation mode.

20