Mixer Function

Effect Parameters
■ DSP System Reverb Send (Range: 000 to 127)

This parameter adjusts how much reverb is applied to all

The Mixer lets you control the effects applied to each

parts.

individual part, making it different from the Effect Mode,

 

 

 

 

whose settings are applied to all parts in general.

 

 

 

 

 

 

D . R v b S n d

 

■ Reverb Send (Range: 000 to 127)

 

 

 

This parameter controls how much reverb is applied to a part.

■ DSP System Chorus Send (Range: 000 to 127)

A setting of “000” turns reverb off, while a setting of 127

 

 

 

 

applies maximum reverb.

This parameter adjusts chorus.

•“Reverb Send” does not work with some drum sounds.

 

 

 

 

 

 

 

 

 

 

D . C h o S n d

 

 

 

R v b

S e n d

 

 

 

 

 

NOTE

 

 

■ Chorus Send (Range: 000 to 127)

 

 

•

Changing the tone, volume, pan pot, coarse tune, fine

This parameter controls how much chorus send is applied to

 

tune, reverb send, or chorus send setting causes the

a part. A setting “000” turns chorus send off, while a setting

 

corresponding MIDI message to be output from the MIDI

of 127 applies maximum chorus send.

 

terminal.

• “Chorus Send” does not work with drum sounds.

•

Changing the tone settings changes the tone, octave

 

 

 

 

 

 

 

shift, reverb send, chorus send, and DSP line* parameter

 

 

C h o

S e n d

 

 

 

settings.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

* When DSP is off (See the note on page E-82.)

 

 

 

 

 

 

•

Turning on the Mixer’s DSP Line parameter (page E-

 

 

 

 

 

 

■ DSP Line (Settings: on, oFF)

 

 

 

 

49) causes the settings of the DSP Pan, DSP System

 

 

 

 

Reverb Send, and DSP System Chorus parameters to

You can use this parameter to turn DSP line off for a particular

 

 

be used in place of the Pan Pot, Reverb Send, and

channel, or to turn it on.

 

 

 

 

Chorus Send parameters.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DSP

L i n e

 

 

 

 

 

 

 

 

DSP Part Parameters
■DSP Level (Range: 0 to 127)

Sets the post-DSP volume.

DSP L e v e l

■DSP Pan (Range: –64 to 0 to 63)

Sets the post-DSP stereo pan.

DSPP a n

E-50

735A-E-052A