Radio Shack CD-3319 owner manual Checking a Programmed Sequence, Erasing a Programmed Sequence

14-543.fm Page 13 Wednesday, June 30, 1999 3:52 PM

3. Select the track you want by

pressing SKIP/SEARCH or

. The track number you selected appears on the display.

4.Press PROGRAM. The selected track is stored, and the next pro- gram number appears on the dis- play.

5.Repeat Steps 3 and 4 to store up to 16 tracks.

Notes:

•You can store the same track more than once.

•When 16 tracks are pro- grammed, C -01and the first track’s number appear on the display.

6.To complete programming and play the programmed sequence,

press PLAY/PAUSE . The CD player begins playing the first track of the programmed sequence. The display shows the play indicator, the current track number, and the current track’s elapsed playing time.

Notes:

•Programming is not completed

until you press PLAY/PAUSE .

•To repeat, skip over, or search for tracks, see “Special CD Player Features.”

Checking a Programmed Sequence

To check the programmed sequence, while the CD is stopped, repeatedly press PROGRAM. The display shows each stored track number.

Erasing a Programmed Sequence

Any of the following will erase a pro- grammed sequence:

•Press STOP/CLEAR until PROGRAM clears from the display and the CD’s total number of tracks and playing time appear.

•Press STOP/CLEAR . Then press PUSH OPEN after the CD stops turning.

•Set FUNCTION to another position.

•Disconnect the power source.

13