To start random play from the current track, repeatedly press MODE until SHUFF appears. Random play be- gins after the current track ends.
To cancel random play, repeatedly press MODE until SHUFF disappears.
USING PROGRAMMED PLAY
You can program up to 20 tracks from the loaded CD to play in any order you choose (you can program the same track to play more than once).
1.While power is on, repeatedly press PROG. PROG flashes on the display.
2.Repeatedly press either 
or
to display the number of the first track you want to store.
3.Press PROG again to store the selected track number and advance to the next selection number.
Note: If the CD is playing while you are programming and you
press 
to cancel program mode, the CD continues play.
4.Repeat Steps 2 and 3 for each track you want to store, up to 20 tracks in all.
Note: If you try to store more than 20 tracks in memory, the CD player stores each consecutive track over the first tracks stored.
5. To play the programmed
sequence, press 
. The first track in the sequence plays.
While the sequence plays, you
can press 
or 
to move backward or forward in the sequence.
6.After the last programmed track ends, the CD player stops. To stop the CD sooner, press 
.
You can replay the programmed se- quence within 30 seconds after play stops. Otherwise, the CD player turns off and clears the programmed se- quence.
To replay the programmed sequence, press PROG so PROG flashes, then press 
.
To review the programmed track numbers after programming, press PROG repeatedly.
To clear the programmed sequence from memory, press 
twice or open the CD compartment cover.
12 |
| Operation | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
