42-6004.fm Page 7 Friday, July 21, 2000 1:18 PM

(neither supplied). Both are available at your local RadioShack store.

Cautions:

You must use a (Class

!2) power source that supplies 4.5V DC and

delivers at least 600 mA. Its cen- ter tip must be set to positive and its plug must fit the CD player’s DC IN 4.5V jack. Using an adapter that does not meet these specifi- cations could damage the CD player or the adapter.

Always connect the AC adapter to the CD player before you con- nect it to AC power. When you finish, disconnect the adapter

from AC power before you dis- connect it from the CD player.

Follow these steps to connect the CD player to AC or DC power.

1.Insert the size B Adaptaplug into the AC or DC adapter’s cord so it reads TIP +.

2.Set the adapter’s voltage switch to 4.5V, as necessary.

3.Insert the barrel plug into the CD player’s DC IN 4.5V jack.

4.Depending on the type of adapter you are using, plug the other end of the adapter into a standard AC outlet or a 12V power source.

ˆConnections

You can listen to your CD player by connecting optional earphones, head- phones, or amplified speakers to the CD player’s PHONES jack, or by con- necting a home audio or vehicle’s sound system to the CD player’s LINE OUT jack.

Note: If the jacks on your equipment do not match the plugs on the sup- plied Y-cable, check with your local RadioShack store for the proper ca- ble adapter.

CONNECTING

EARPHONES OR

HEADPHONES

For private listening, connect option- al earphones or headphones with a 1/8-inch (3.5-mm) plug into the PHONES jack on the CD player.

Listening Safely

To protect your hearing, follow these guidelines when you use an ear- phone or headphones.

Connections

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 7
Image 7
Radio Shack CD-3904 owner manual Connections, Connecting Earphones or Headphones