17
3. Press to call the phone number. IU (in use) flashes
and diALing then the number called appear briefly,
then
on reappears.
4. To end the call, press .
Note: Closing the cover does
not
end or disconnect the call.
System Busy Message
In addition to the normal busy signal you hear when a num-
ber you call is busy, your phone sounds tones and displays
these messages to indicate that it cannot complete a call.
When either of these conditions occur, you can press
again to redial the number immediately (see “Using Automat-
ic Redial” on Page22), or press then dial the number
again.
Tone You See Description
Fast Busy snd to
rEdiAL The cellular system is
busy.
High/low snd to
rEdiAL The cellular system
could not complete the
call.
SND
END
SND
END
17-1110.fm Page 17 Wednesday, July 21, 1999 1:38 PM