Radio Shack DX-350 USING STANDARD AC POWER

1. Open the battery compartment by pushing the cover in the

direction of the arr ow.

2. Install four AA batteries in the battery compartment as indi-

cated by the polarity symbols (+ and –) mark on the back of the

receiver. Place the batteries on top of the ribbon so you can

easil y li ft them out lat er.

3. Replace the cover.

USING STANDARD AC POWER

You can power the receiver from standard AC power with an AC

adapter (such as Cat. No. 273-1454, not supplied).

Insert the adapter’s small connector into the receiver’s DC 6V jack.

Then plug the adapter into a standard AC outlet. Internal batteries

automaticall y discon nect.

Caution: The recommended adapter sup plies 6 volts DC and deliv-

ers at least 150 milliamps with its center tip set to negative. Using

an adapter that does not meet these specifications could damage

the recei ver or the adapter.

20-209A.fm Page 5 Wed nesda y, August 4, 1999 8:36 AM