Radio Shack ET-1119 owner manual Using Flash, Paging, Memory Dialing

43-1119.fm Page 14 Thursday, September 16, 1999 1:58 PM

USING FLASH

Flash performs the electronic equiva- lent of a switchhook operation for spe- cial services, such as Call Waiting. For example, if you have Call Waiting, press

FLASH to answer an incoming call without disconnecting the current call.

Press FLASH again to return to the first call.

Note: If you do not have any special phone services, pressing FLASH might disconnect the current call.

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank- by-phone, require tone signals. If you have pulse dialing, you can still use these special tone services by following these steps.

1.Be sure PULSE/TONE is set to

PULSE.

2.Dial the service’s main number.

14

3.When the service answers, press

TONE . Any additional numbers you dial are sent as tone signals.

The phone resets to the pulse dialing on the next call.

PAGING

To page the person who has the hand- set or to locate the handset when the phone is not in use, press PAGE/FIND lo- cated on the base. The handset beeps for 2 seconds. To have the handset beep for a full minute, hold down PAGE/ FIND for 2 seconds. To stop the beep- ing, press TALK twice.

MEMORY DIALING

You can store up to ten phone numbers and names in memory, then dial a stored number by entering its memory location number.