Radio Shack ET-598 owner manual Connecting and Charging the Battery Pack

43-698a.fm Page 12 Friday, August 13, 1999 12:56 PM

8.Press and lift out the handset holder, rotate it 180°, then snap it back into place so it holds the handset.

9.Raise the base’s antenna to a ver- tical position and fully extend it.

12

CONNECTING AND CHARGING THE BATTERY PACK

The ET-598 comes with a recharge- able nickel-cadmium battery pack in- stalled in the handset. Before using your phone, you must connect the bat- tery pack, then charge it for about 14 hours.

1.Remove the screw from the bat- tery compartment cover on the bottom of the handset, then press down and slide off the handset’s cover.

2.Plug the battery pack’s plastic connector into the phone’s socket. The connector fits only one way.

3.Replace the cover and tighten the screw.