5.Plug the other end(s) of the modu- lar cord(s) into the modular jack(s).
6.Raise the base’s antenna to a ver- tical position and fully extend it.
8
Mounting the Base on a Wall Plate
To make this connection, you need a 2-line short modular cord, such as Cat. No. 279-390 (not supplied).
1.If you have a single 2-line modular jack on the wall plate, plug one end of a 2-line short modular cord into the TEL LINE 1/2 jack.
Note: When you make this con- nection, you should not connect another modular cord to the TEL LINE 2 jack or phone operation will be erratic.
If you have a single 1-line modular jack on the wall plate and a modu- lar wall jack close by, plug one end of a short modular cord into the TEL LINE 1/2 jack to use line 1, then connect the supplied modu- lar cord into the TEL LINE 2 jack to use line 2.
If you have only a single 1-line modular jack on the wall plate, plug one end of a short modular cord into the TEL LINE 1/2 jack to use line 1, or to the TEL LINE 2 jack to use line 2.
