2.Plug the supplied AC adapter’s barrel plug into the DC IN 9V jack.
3.Route the adapter cord through both the upper and lower grooves and the modular cord(s) through only the upper groove on the bot- tom of the base.
Upper
Grooves
Lower
Groove
Note: If you are using two modu- lar cords, route both through the appropriate grooves.
4.Plug the adapter into a standard AC outlet. The POWER indicator on the base lights.
5.Plug the other end(s) of the modu- lar cord(s) into the wall plate jack (and wall jack, if appropriate), then align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it.
6.Press and lift out the handset holder, rotate it 180°, then snap it back into place so it holds the handset.
9
