PLACING THE BASE ON A DESK TOP
Follow these steps when you place the base on a desk, shelf, or table.
1.Remove the bracket by holding in both tabs and gently pulling out the wide end of the bracket.
2.Plug one end of the supplied long modular cord into the phone jack on the back of the base.
3.Insert the supplied AC adapter’s barrel plug into the DC 12V jack on the back of the base.
4.Route the adapter’s cord through the strain relief slot on the bottom of the base.
Strain
Relief
Slot
5.Insert the tabs on the narrow end of the bracket into the lower slots on the bottom of the base and push the tabs on the wide end of the bracket into the upper slots on the bottom of the base.
6.Plug the modular cord’s other end into a modular phone line jack.
7
