Radio Shack ET-919 owner manual Setting the HANDSET’S Volume, Using Redial, Using Flash

43-1089.fm Page 15 Tuesday, August 17, 1999 3:24 PM

Press MUTE during the call. The MUTE indicator on the handset lights steadily.

MUTE

Indicator

Press MUTE again to resume your phone conversation. The MUTE indica- tor turns off.

SETTING THE HANDSET’S VOLUME

You can select one of three different vol- ume settings (soft, normal, loud) using VOLUME s or t during a call.

1.Lift the handset and press TALK. The TALK indicator lights.

2.Repeatedly press VOLUME s to increase the volume level or VOL- UME t to decrease it.

Note: Every time you press VOL- UME s or t, the ET-919 beeps, except when it is already at the loud- est or softest volume level.

USING REDIAL

To quickly redial the last number dialed, press TALK. Then when you hear the dial tone, simply press REDIAL.

Notes:

•The redial memory holds up to 16 digits, so you can redial long- distance as well as local numbers.

•The redial memory also holds pause entries. See “Entering a Pause” on Page 17.

•The redial memory does not store a flash entry or any digits you press after FLASH (see “Using Flash”).

USING FLASH

FLASH performs the electronic equiva- lent of a switchhook operation for spe- cial services, such as Call Waiting.

15