Radio Shack ET-925 owner manual Connecting and Charging the Battery Pack

43-1095.fm Page 10 Tuesday, August 17, 1999 3:37 PM

CONNECTING AND CHARGING THE BATTERY PACK

The ET-925 comes with a recharge- able nickel-cadmium battery pack in the handset. Before using your phone, you must connect the battery pack and then charge it for about 14 hours.

1.Remove the screw on the battery compartment cover, then press down and slide the cover in the di- rection of the arrow to remove it.

2.Plug the battery pack’s connector into the socket in the compart- ment. The connector fits only one way.

3.Replace the cover, then reinsert and tighten the screw.

To charge the battery pack, simply place the handset on the base.

The CHARGE indicator on the base lights.

10

CHARGE Indicator

Recharge the battery pack when the handset beeps and the TALK/BATT LOW indicator flashes during a call.

Notes:

•If the CHARGE indicator does not light when you place the handset on the base, be sure the battery pack and AC adapter are correctly and securely connected. Be sure the charging contacts on the handset and the base are making contact.

Also, check the charging contacts on the handset and the base. If the contacts are dirty or tarnished, clean them with a pencil eraser.